Home / Style Guide / Learn About Cabinet / Accent Lighting / System Diagrams / TaskWork-Modular-120-Volt-Flourescent TaskWork Modular 120 Volt Flourescent Flexibility and cost-effectiveness in one Step 1 SELECT APPROPRIATE LIGHT FIXTURE SIZE 10026 WH (12 1/2") 8 Watts Max T5 Fluorescent lamp included 12-1/4" L x 4-3/4" W x 1" H 10027 WH (21 1/2") 13 Watts Max T5 Fluorescent lamp included 21-1/2" L x 4-3/4" W x 1" H 10028 WH (33 1/2") 21 Watts Max T5 Fluorescent lamp included 33-1/2" L x 4-3/4" W x 1" H Step 2 INTERCONNECT CABLES CONNECT MULTIPLE FIXTURES 10571 WH - Interconnect 9 inches10572 WH - Interconnect 14 inches10573 WH - Interconnect 21 inches For longer interconnect cable lengths, multiple cables may be connected together Step 3 power AND ACCESSORIES 10570* WH - Wire Module 7-3/4" L x 2-5/8" W x 1" H Provides for safe, push-in wiring without the use of wire connectors Interconnect cables easily join wire module and fixtures Integrated supply wire strain relief for one or two wires Snap-on cover Use for hard-wire installation Use with sheathed cable (12/2 or 14/2 with ground) 540 Watt Maximum 10569 WH Master Switch (optional) 3-1/2" L x 5" W x 1" H Can be installed between the wiring module and the first fixture to control the entire system. Or, it can be positioned between fixtures to control those fixtures located after it in line. 10575** WH Plug-in Master Switch (optional) 3-1/2" L x 5" W x 1" H Allows control of cabinet lighting without accessing house wiring * For use only with Kichler interconnect cables as part of TaskWork Modular systems ** For use only with Kichler interconnect cables as part of TaskWork Modular systems. Note, too, that switch assembly will plug directly into the side of any TaskWork Modular fixture. This eliminates the need to use an interconnect cable. Check mounting location for adequate space.